3757 w. touhy ave., lincolnwood, il 60712 (847)675-1760 fax (847) 675-2850 www.illcap.com smh +105c general purpose surface mount aluminum electrolytic capacitors features ? standard case sizes ? lead free leads ? low cost ? extended life applications ? bypass ? filtering ? coupling ? de-coupling specifications operating temperature range -55c to +105c capacitance tolerance + 20% at 120 hz, 20c wvdc 6.3 10 16 25 35 50 surge voltage svdc 7.9 13 20 32 44 63 wvdc 6.3 10 16 25 35 50 dissipation factor tan .3 .22 .18 .14 .12 .12 2 minutes leakage current .01cv or 3ua,whichever is greater rated wvdc 6.3 10 16 25 35 50 -25c to +20c 4 3 2 2 2 2 low temperature stability impedance ratio (120 hz) -40c to +20c 8 6 4 4 3 3 1000 hours at 105c with rated wvdc and ripple current applied capacitance change <25% of initial measured value dissipation factor <200% of maximum specified value load life leakage current >100% of maximum specified value 1000 hours at 85c with no voltage applied capacitance change <25% of initial measured value dissipation factor <200% of maximum specified value shelf life leakage current >100% of maximum specified value capacitors placed on a 250c hot plate for 30 seconds with their electrode terminations facing downward will fulfill the following conditions after being cooled to room temperature capacitance change <10% of initial measured value dissipation factor <100% of maximum specified value resistance to soldering heat leakage current >100% of maximum specified value frequency (hz) temperature (c) 50 120 400 1k 10k 100k 105 85 70 ripple current multipliers 0.8 1.0 1.0 1.1 1. 3 1.5 1.0 1.7 2.0 d l w+ 0.2 h+ 0.2 c+ 0.2 r p+ 0.2 4 5.4 +0.1/-0.2 4.3 4.3 5.0 0.5~0.8 1.0 5 5.4 +0.1/-0.2 5.3 5.3 6.0 0.5~0.8 1.4 6.3 5.4 +0.1/-0.2 6.6 6.6 7.3 0.5~0.8 2.2 6.3 5.8 +0.1/-0.2 6.6 6.6 7.3 0.5~0.8 2.2 6.3 7.7 +0.1/-0.2 6.6 6.6 7.3 0.5~0.8 2.2 8 6.2 +0.1/-0.2 8.3 8.3 9.0 0.7~1.0 3.2 8 10.2 +0.1/-0.2 8.3 8.3 9.0 0.7~1.0 3.2 10 10.2 +0.1/-0.2 10 10 11.0 0.7~1.0 4.6
smh +105c, extended life 1000 hours capacitance (f) wvdc ic part number maximum esr (m) 120 hz, +20c maximum rms ripple current (ma) 120 hz, +105c dims dxl (mm) 0.1 50 104smh050m 1989.44 2.3 4x5.4 0.22 50 224smh050m 904.29 3.4 4x5.4 0.33 50 334smh050m 602.86 4.1 4x5.4 0.47 50 474smh050m 423.28 5 4x5.4 1 50 105smh050m 198.94 10 4x5.4 2.2 50 225smh050m 90.43 16 4x5.4 3.3 50 335smh050m 50.24 16 4x5.4 4.7 35 475smh035m 49.383 22 4x5.4 4.7 50 475smh050m 42.33 23 5x5.4 10 16 106smh016m 33.157 18 4x5.4 10 35 106smh035m 23.21 30 5x5.4 10 50 106smh050m 19.894 32 6.3x5.4 22 6.3 226smh6r3m 21.1 22 4x5.4 22 16 226smh016m 15.07 39 5x5.4 22 35 226smh035m 10.55 38 6.3x5.4 22 50 226smh050m 9.04 51 6.3x5.4 33 10 336smh010m 12.06 34 5x5.4 33 25 336smh025m 8.038 65 6.3x5.4 33 35 336SMH035M 7.033 42 6.3x5.4 33 50 336smh050m 6.03 70 6.3x7.7 47 6.3 476smh6r3m 9.877 46 5x5.4 47 16 476smh016m 7.055 70 6.3x5.4 47 35 476smh035m 4.938 80 6.3x7.7 47 50 476smh050m 4.23 80 6.3x7.7 100 6.3 107smh6r3m 4.642 71 6.3x5.4 100 16 107smh016ml6 3.3157 65 6.3x5.4 100 50 107smh050m 1.989 230 8x10.5 150 10 157smh010m 2.653 86 6.3x7.7 150 16 157smh016m 2.21 95 6.3x7.7 220 16 227smh016m 1.507 120 6.3x7.7 220 25 227smh025ml10 1.2057 180 10x10.5 220 35 227smh035m 1.06 190 8x10.5 330 6.3 337smh6r3m 1.407 290 6.3x7.7 330 16 337smh016ml10 1.005 195 10x10.5 330 25 337smh025m 0.8038 220 8x10.5 470 16 477smh016m 0.7055 340 8x10.5 1000 6.3 108smh6r3m 0.4642 230 8x10.5
|
